The Clear Heater System has been designed and built with a focus on quality and safety and meets all relevant requirements of applicable product safety directives. 

The EC Declaration of Conformity Certificate is a sign that the CHS has been designed and constructed for compliance with relevant essential requirements, and has been through the appropriate conformity assessment processes.

Please take time to read through the safety sections below and familiarise yourself with them before using your Clear Heater System.
EC Declaration of Conformity Certificate
EC Declaration of Conformity Certificate.
Safety Information: English / French / Spanish

Installation

  • The Clear Heater System must be installed by a certified installer authorized by Logicor
    Our installers have to pass strict qualification standards before they become approved to install our systems.
    Our installers will advise and install your Clear Heater System in the most effective position to heat your property safely and efficiently.

  • WARNING - Clear Heater units must not be located immediately below a wall socket outlet

  • WARNING - Bathroom Installations
    Clear Heaters units and control panels located in a bathroom must be positioned so that switches and other controls cannot be touched by a person in the bath or shower and heater units must not be installed at a height greater than 1.8m in a bathroom.

  • WARNING - Do not install the Clear Heater System in a wardrobe or to a ceiling
    Our installers will advise and install your Clear Heater System in the most effective position to heat your property safely and efficiently.

Safety Standards and Precautions

Safety Standards : EN60335-1, EN60335-2-30, EMC, RoHS, REACH and others.
WARNING : Heater units must not be used if the glass panels are damaged
Clear Heaters are robust and durable but please avoid impacts from sharp or heavy objects: a hammer for example. In the unlikely event that a glass panel of your clear heater unit becomes damaged unplug the heater unit from the wall socket if it is safe to do so and contact Logicor (CH) Ltd.
CAUTION : Some parts of this product can become hot and cause burns. Particular attention has to be given where children or vulnerable people are present.
Clear Heaters operate at a normal 60°C (140 °F). The use of this heater by young children under 8 years old, by infirm persons or persons with reduced physical, sensory or mental capabilities, or by persons with a lack of experience and knowledge without supervision is not recommended. Do not allow young children to play with the appliance. Children of less than 3 years should be kept away unless continuously supervised.
WARNING : Do not dismantle; this appliance contains no user serviceable parts.
In the unlikely event of you requiring service please contact your authorised distributor or Logicor by visiting www.logicor.co.uk.
WARNING : If the power cord is damaged do not use the appliance.
If the power cord is damaged it must be replaced by the manufacturer, its service agent or similar qualified persons to avoid a hazard.
WARNING : In order to avoid overheating, do not cover the heater.
If you wish to dry clothes with the Clear Heater System please purchase a clothes dryer system from Logicor. The Logicor clothes dryer system provides a convenient, safe and quick method to dry clothes positioned a safe distance from the heater unit. At no point must clothing be hung directly over a Clear Heater unit.

WARNING: Do not cover

Cleaning

  • IMPORTANT - The temperature sensor located in the Heater unit base is designed to cope with normal household dust. Please avoid spraying polish, hair sprays or other chemical sprays near the sensor as it may reduce or damage the performance. Use a clean dry cloth to clean the heaters and control panel but avoid polish, sprays or harsh abrasives.

  • IMPORTANT - Cleaning and user maintenance shall not be made by children.